Kenwood DPX-8030MD Скачать руководство пользователя страница 11

Страница: 11 / 28

DPX-8030MD

TEST MODE

∗

1: "Track No. 1" may appear on the display right after play

due to the timing.

EQ alignment

Tap the EQ/AUD key 1 time during source display to call

up EQ alignment mode.

•

Press the 1 key for Flat.

•

Press the 2 key for Full-boost.

•

Press the 3 key for Full-cut.

Audio: balance, fader alignment

Press and hold down the EQ/AUD key to call up balance,

fader alignment mode.

keys --------- Balance alignment

keys ---------- Fader alignment

(All sources other than ALL OFF mode)

•

Set balance alignment in 3 steps

RIGHT CENTER LEFT (L15, R15)

•

Set fader alignment in 3 steps

FRONT CENTER REAR (F15, R15)

Audio: X ’OVER Front/Rear

Call up X ’OVER Front/Rear alignment mode by holding the

EQ/AUD key down and then tapping it 1 time.

(All sources other than ALL OFF mode)

Shift through the following items with the keys

and align using the keys.

•

HPF Front frequency alignment ---- Set Off

220 Hz in 2 steps.

•

HPF Rear frequency alignment ---- Set Off

220 Hz in 2 steps.

•

LPF frequency alignment

Off in 2 steps.

+10

REV

(LPF and N-F alignment can be made during preout

alignment in "N-F")

Audio: Amp Control

Call up Amp Control alignment mode by holding the

EQ/AUD key down and then tapping it 2 times.

(All sources other than ALL OFF mode)

Shift through the following items with the keys

and align using the keys.

•

Amp Bass (BMS) alignment --- FLT (Flat) +18

•

Amp Freq (Offset) alignment --- NML (Normal) Low

Adding tuner functions

Call up alignment mode by holding down the SEL key in

tuner:source, select the following items with the

keys and then align with the keys.

The following functions can be added (only while in test mode).

•

Preout alignment

Rear

N - F

•

AUX-IN function

OFF

Haw to exit the test mode

Resetting will cancel the test mode and start up the unit

with all settings initialized (factory settings).

Setting in ACC-off or Power-off will initialize (factory settings)

the Source, Tuner and Audio settings.

Backup current measurement

Mute turns off after 2 seconds when reset (backup is on)

by ACC-off, regardless of the test mode.

(The CD/MD mechanism takes 2 seconds or longer to

turn off because peripheral power is still available.)

M D

Current track

Search target

Tracks other than shown below

No.7

No.2

No.13

No.23

No.30

No.34

www. xiaoyu163. com

QQ 376315150

TEL 13942296513

TEL 13942296513 QQ 376315150 892498299

Содержание DPX-8030MD





























Результаты поиска

Содержание DPX-8030MD

Отзывы:

Бренды по названию

Популярные бренды

Kenwood DPX-8030MD, Руководство по обслуживанию

Результаты поиска

Содержание DPX-8030MD

Отзывы:

Бренды по названию

Популярные бренды