Kenwood DPX-5300M Скачать руководство пользователя страница 36

Страница: 36 / 52

• The tuner is set to have a strong DSP effect

(Church, etc.).

• Set the ON switch to the N side.

• Connect the speaker output terminal to each speaker correctly.

• Turn off the DSP or change to a less effective setting. It may

be distorted depending on the reception status of the tuner. (Page

28)

• The car antenna is not extended. • The
antenna control power supply is not connected.

• The antenna input is not properly connected.

• It does not switch to a source that is not connected. See

“Connecting” (page 48) to connect correctly. • Press the reset

button. (Page 8)

• The connection of the input / output cable,

power cord, power control cord, etc. is incorrect.

• Adjust the volume properly. • Check
the speaker wiring.

• The separately sold unit required to listen to

each source is not connected. • Reset button

after connecting the separately sold unit

• The volume is too
loud. • The speaker cord is caught in the screw

on the vehicle side. • The speaker wiring is

incorrect.

• Please use a compatible model disc changer.

• Make sure to connect the antenna input securely.

• The fuse is blown.

elp

Fedder and balance are on one side.

• Extend the antenna sufficiently. • See
“Connecting” (page 48) and reconnect correctly.

Is not pressed. • The

ON switch of the separately sold unit is set

to the O side. • You are using a disc

changer that this unit does not support.

The built-in microcomputer is malfunctioning.

(Page 8)

Adjust the fader and balance correctly. (Page 32)

• Make sure that the cords are not short-circuited, and then

replace with a fuse of the same capacity. • See

“Connecting” (page 48) and reconnect correctly.

Press the reset button. (Page 8)

Pressing the SRC button does not switch to the desired source

Power does not turn on

Does not work even if the operation switch is pressed

No sound / low sound

Tuner sensitivity is poor

Poor sound quality (sound is distorted)

Machine Translated by Google

Содержание DPX-5300M





















































Результаты поиска

Содержание DPX-5300M

Отзывы:

Бренды по названию

Популярные бренды

Kenwood DPX-5300M, Инструкция по эксплуатации

Результаты поиска

Содержание DPX-5300M

Отзывы:

Бренды по названию

Популярные бренды