TEST MODE
11
DPX302,DPX-MP2100
• Sub Woofer Phase is adjusted by the VOL knob and [
]
/ [
] keys in 2 steps: Reverse
↔
Normal. (Default value:
Normal)
• Volume Offset (except built-in AUX) is adjusted by the
VOL knob and [
] / [
] keys in 2 steps: -8
↔
0. (Default
value: 0)
• Volume Offset (built-in AUX) is adjusted by the VOL knob
and [
] / [
] keys in 3 steps: -8
↔
0
↔
+8. (Default
value: 0)
• Loudness ON/OFF is adjusted by the VOL knob and [
]
/ [
]keys in 2 steps: OFF
↔
ON. (Default value: OFF)
• Bass f / Bass Q / Bass EXT / Middle f / Middle Q / Treble f
are not displayed in the audio adjustment mode.
●
MENU
• Press [EQ] key briefl y to enter the MENU.
• Press the remote control [DNPP/SBF] key or the [DIRECT]
key to enter the MENU.
• Continuous forwarding by remote control is prohibited.
●
Backup current measurement
If reset while in Acc OFF (Back Up ON) condition, MUTE
terminal goes off 2 seconds later, rather than 15 seconds.
(During this time, the CD mechanism does not function.)
●
Special displays while all lights are on
When all lights are on with STANDBY source, if the
following keys are pressed, the following messages are
displayed.
[1]
key
Version is displayed (forwarding)
(Display) TYPE : x_ _ _
→
(“x” is displayed in hexadecimals)
6 3 1 K – 1 . 0 2
→
(“development ID” – “version”)
all lights on
→
∗
TYPE indicates µ-com destination, and shows real-time
condition of the destination terminal.
[2]
key
Serial No. is displayed (8 digits)
(Display) xxxxxxxx
[3]
key
Key pressed briefl y: Power ON time is displayed.
While Power ON time is displayed, press and hold for 2
seconds to clear the Power ON time.
(Display) PON_0Hxx (00~50 is displayed for “xx”.
When less than 1 hour, display by
increment of 10 minutes)
xxxxx (00001~10922 is displayed for “xxxxx”)
MAX 10922 (hours)
[4]
key
Key pressed briefl y: CD operation time is displayed.
While CD operation time is displayed, press and hold for 2
seconds to clear the CD operation time.
(Display) CDT_0Hxx (00~50 is displayed for “xx”
When less than 1 hour, display by
increment of 10 minutes)
xxxxx (00001~10922 is displayed for “xxxxx”)
MAX 10922 (hours)
[5]
key
Key pressed briefl y: Number of CD EJECT time is displayd.
While the CD EJECT times is displayed, press and hold for
2 seconds to clear the CD EJECT time.
(Display) EJCxxxxx MAX 65535 (times)
[6]
key
Not used.
[FM]
key
ROM correction version is displayed.
(Display) R1234_ _ _
When E2PROM is not installed: ERR_ _ _ _ _
When not written in: R– – – –_ _ _
When data not matching: R
∗∗∗∗
_ _ _
[
]
key
AUDIO data initialization
(Display) AUD_INIT
[
]
key
Key pressed briefl y: Forced Power OFF data displayed.
While the forced power OFF data is displayed, press and
hold for 2 seconds to clear the data.
(Display) POFF_– – – (No Forced Power OFF)
←
Fixed display
[
]
key
Key pressed briefl y: CD information display mode ON/OFF.
While in CD information display mode, press and hold for 2
seconds to clear all CD information.
∗
Please refer to the next table.
●
CD information display mode
[AM]
key
↑
I2C communication condition display
(Display) I2C_OK_ _
NG
CD mechanism error log display
(switched by [
] / [
] keys)
(Display) MCERR1: xx
↔
MCERR2: xx
↔
MCERR3: xx
↔
MCERR1: xx
↔
(“– –” or the error code is displayed for “xx”)
CD loading error log display (switched by [
] / [
] keys)
(Display) LDERR1: xx
↔
LDERR2: xx
↔
LDERR1: xx
↔
(Number of times is displayed for “xx”)
MAX 99 (times)
