background image

34

DP-K1000

Care and storage of main unit

Do not place in the following locations

Place exposed to direct sunlight.

Place subjected to excessive humidity or dirt.

Place exposed to direct heat from heating equipment.

Be careful against condensation

When the diff erence in temperatures between the 
main unit and the environmental air is large, dew may 
be condensed inside the main unit and may cause 
malfunction of the main unit. If this happens, leave the 
main unit for a few hours until its internal mechanisms 
are dried up.
Take special care against condensation when the main 
unit is moved between places with a large temperature 
difference or into a room with high humidity.

When a main unit becomes dirty

When the front panel or case gets dirty, wipe with a soft 
dry cloth. Do not use lacquer thinner, benzine, alcohol 
or contact revitalizer for these chemicals will cause 
discoloration or deformation.

„

z
z
z

„

„

Care and storage of CD

Before storing the CD

When the main unit is not to be used for a long period, 
take out the CD and store in the case.

When a CD becomes dirty

When a disc is contaminated with fi ngerprints  or 
other stains, wipe gently in the radial direction using 
a soft dry cloth.

Do not use an analog disk cleaner, lacquer thinner, 
benzine or alcohol.

Do not use a disc accessory (stabilizer, protective 
sheet, protective ring, etc.) or lens cleaner.

Other cautions

Do not write letters on a CD using a pencil or 
ballpoint pen.

Do not use a CD if the sticker or label on it is peeled 
off or bond is overflowed around the sticker or label.

Do not stick a sheet of paper, sticker or label on a CD.

„

„

z

z

z

„

z

z

z

Care and Storage

B60-5719-00.indb   34

B60-5719-00.indb   34

2007/09/14   18:06:09

2007/09/14   18:06:09

Содержание DP-K1000





































Отзывы: