Kenwood DNX996XR, Инструкция по эксплуатации, Страница: 109 / 132

Connection/Installation
109
English
5) Connect the wiring harness connector to the
unit.
6) Install the unit in your car.
7) Reconnect the
¤
terminal of the battery.
8) Perform the Initial Setup.
See
Initial setup (P.10)
.
Installing the unit
Ñ
Non-Japanese cars
Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.
Ñ
Japanese cars
6
or
7
6
or
7
Car Bracket
NOTE
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
Ñ
Trim plate
1) Attach accessory
8
to the unit.
DNX996XR / DNR876S
8
DNX696S / DNX576S / DNR46EX /
DNR476S
A
B
8
B
: Narrow
A
: Wide
●
General Motors cars (DNX996XR)
1) Cut out accessory
-
to meet the shape of the
opening of the center console.
2) Attach accessory
-
to the unit.
-
Cut out to meet the shape
of the opening in the
vehicle.
●
Toyota/Scion cars (DNX996XR)
1) Cut out accessory
-
as illustrated.
Cutting line
-
2) Fold double-sided adhesive (accessory
=
)
along the slit and attach it to accessory
-
cut-out against the center rib as illustrated.
Use 2 pieces of accessory
=
for 1 accessory
-
cut-out.
3) Attach accessory
-
cut-out to the unit.
=