Kenwood DNX7220, Инструкция по эксплуатации

Страница: 84 / 100

84 DNX7220
Tone Setup
You can set a Tone curve.
1 Display the Tone screen
See <Equalizer Control> (page 83).
2 Set the Tone
1
2
3
4
5
6
7
8
9
1
Tone curve becomes flat.
2
Bass adjustment items are displayed.
3
Middle adjustment items are displayed.
4
Treble adjustment items are displayed.
5
Sets the Center frequency.
6
Sets the level.
7
Sets the Q factor. (Only Bass and Middle can
be set)
8
Bass DC Extend settings. (Only when Bass is
selected)
If turned "On", it extends the bass
center frequency to the low register by
approximately 20%.
9
Returns to the "Equalizer" screen.
Audio Control
Zone Control
You can set the front and rear audio source.
1 Display Zone Control
Touch in the "Audio
Control Menu" screen (page 82).
1
2
1
Displays the current source.
2
Returns to the "Audio Control Menu" screen.
2 Set the Zone Control
3
5
5
6
7
4
3
Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
4
Switches the front and rear audio sources.
(This button appears when the Zone
function is On.)
Use "Reverse" to change over the front and
rear audio sources.
5
Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)
⁄
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is also
switched to the same source.
6
Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)
7
Returns to the "Audio Control Menu" screen.
DNX̲DDX7̲E.indb 84 DNX̲DDX7̲E.indb 84 08.1.31 1:27:12 PM 08.1.31 1:27:12 PM