Kenwood DNX4330, Инструкция по эксплуатации

Страница: 7 / 66

12 12 13
Return to the Top page
Basic Operations
Return to the Top page
Basic Operations
T
urning on the Unit
The method of turning on is different depending on the model.
Press the <MENU> button.
The unit is turned on.
●
To turn off the unit:
Press the <MENU> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform
Initial setup (P.13) .
1
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P.115) .
Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is “British English (en)”.
1
Touch [SET].
2
Touch [
2
] or [
3
] to select the desired language.
3
Touch [Enter].
For detailed operation, see Language setup (P.83) .
Angle
Adjust the position of the monitor. Default is “0”.
1
Touch [SET].
2
Touch desired angle number and [ ].
For detailed operation, see Monitor angle control (P.87) .
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is “iPod”.
1
Touch [iPod] or [AV-IN2].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1
Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3
If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [ ].
For detailed operation, see Panel color coordinate (P.88) .
Camera
Set the parameters for the camera.
1
Touch [SET].
2
Set each item and touch [ ].
For detailed operation, see Camera Setup (P.91) .
1
Continued