Kenwood DNX4330, Инструкция по эксплуатации

Страница: 43 / 66

84 84 85
Return to the Top page
Setting Up
Return to the Top page
Setting Up
Travel Prayer for Safe Drive Setting
(DNX7330BTM/ DNX5330BTM only)
When this function is set, the prayer for
driving safety is displayed when the unit is
turned on, then Quran is played.
1
Touch [SET] of [Travel Prayer for Safe
Drive] in the User Interface screen.
Travel Prayer for Safe Drive Setting screen
appears.
2
Set each item as follows.
Travel Prayer for Safe Drive
Turns the Safe drive pray function on or off.
Sound Volume
Sets the sound volume of Quran.
Touch panel adjustment
1
Touch [Touch] in the System Menu
screen.
Touch Panel Adjustment screen appears.
2
Follow the instruction on the screen
and touch the center of each
.
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
Security setup
You can set up a security code to protect
your receiver system against theft.
NOTE
• When the Security Code function is activated, the
code cannot be changed and the function cannot
be released. Note the Security Code can be set as
the 4 digit number of your choice.
1
Touch [Security] in the System Menu
screen.
Security screen appears.
2
Touch [ON] of [SI].
NOTE
• If “SI” is turned on, the SI indicator on the sub
panel flashes when the vehicle ignition is off and
the panel is detached (
). Default is “ON”.
3
Touch [SET] of [Security Code Set].
NOTE
• If you have already completed the code
registration, [CLR] is displayed.
4
Enter a security code with four-digit
number and touch [Enter].
5
Enter the same code again and touch
[Enter].
Security code is registered.
NOTE
• If you enter a different security code, the screen
returns to step 4 (for the first code entry).
• If you have pressed <Reset> button or if you
have disconnected the Receiver from battery,
enter the correct security code as that you have
entered in step 4 and touch [Enter]. You can use
your receiver.