Kenwood DNX4230BT, Инструкция по эксплуатации

Страница: 35 / 125

34 34
Return to the Top page
CD, Disc, iPod, USB device, SD card
Music/Video/Picture Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.103) .
• To connect iPod to this unit, optional accessory KCA-iP202 or KCA-iP102 is necessary.
When iPod is connected using the KCA-iP202, you can listen to audio and watch video. When iPod is connected
using the KCA-iP102, you can only listen to audio.
When using the KCA-iP202 to connect your iPod, set “iPod AV Interface Use” or “AV-IN2 Interface” to “iPod”, in
AV
Input Setup (P.88)
, or to “AV-IN2” when using KCA-iP102.
See the following sections for each source operation.
•
Music CD (P.34)
• Disc media (P.34)
• USB device (P.36)
• SD Card (P.36)
• iPod (P.36)
Music CD and disc media
NOTE
• In this manual, “Music CD” will be referred to as the general CDs which include music tracks in.
“Disc media” will be referred to as CD/DVD disc which includes audio, picture or video files.
• The screen shot below is for CD. It may be different from the one for disc media.
2
3 3
4 4
5 8
6
2
7
Simple Control screen List Control screen
1
1 Information display
Displays the following information.
•
Track # : Each time you touch this area, display switches between current track number, text, etc.
•
3
,
¡
,
¢
,
7
, etc. : Current play mode display
The meanings of each icon are as follows;
3
(play),
¡
(fast forward),
1
(fast
backward),
¢
(search up),
4
(search down),
7
(stop),
R
(resume stop),
8
(pause).
2 Movie display area/Control switching area
Touch to switch between the Simple Control and List Control screen.
C
D/Audio and Visual Files/iPod Operation