Kenwood DMX7017BTS, Инструкция по эксплуатации

Страница: 58 / 96

Setting Up
58
User Interface Setup
You can setup user interface parameters.
1
Press the
[
MENU
]
button.
h h Popup menu appears.
2
Touch
[
SETUP
]
.
h h
SETUP screen appears.
3
Touch
[
User Interface
]
.
h h User Interface screen appears.
4
Set each item as follows.
■
Steering Remote Controller
Sets the desired function in the steering
remote controller. (Contact your KENWOOD
dealer for details.)
■
Beep
Turns the key touch tone on or off.
Default is “ON”.
■
Vehicle Adaptor Information*
1
Displays the vehicle information.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■
Beep for Parking distance control* 1
Sets whether to generate a warning tone
when the onboard proximity sensor detects
a human or object.
Consult your KENWOOD dealer for details.
■
Parking Distance Display*
1
You can display information about obstacles
around the car.
ON
: Always displays information.
Dyn.
(Default): Displays information when
the sensor detects obstacles.
OFF
: Cancels.
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■
Parking Distance Position* 1
Select where information about obstacles is
displayed on the screen (left or right).
“Left”/ “Right” (Default)
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■
Language Select
Selects a language.
■
Touch Panel Adjust
Adjust the sensing position of touch panel.
(P.59)
■
Clock
GPS-SYNC
(Default): Synchronizes the clock
time with the GPS.
Manual
: Sets the clock manually
■
Time Zone
Select the time zone.
■
Clock Adjust
If you select
[
Manual
]
for Clock, adjust the
date and time manually.
(P.58)
•
*1 This setting is available when a
commercial adaptor is connected.
Ñ
Adjust the date and time
manually.
1
Touch
[
Time Zone
]
in the User Interface
screen.
2
Select the time zone.
3
Touch
[
Clock Adjust
]
in the User Interface
screen.
4
Adjust the date, then adjust the time.
5
Touch
[
Set
]
.