PORTABLE MD RECORDER DMC-S9NET
ENGLISH OPERA
TION MANUAL
123
DMC-S9NET
B60-5436-08
RECORDING FROM STEREO COMPONENTS, ETC.
(pages 30 - 33)
Manual recording
(pages 30 - 32)
[Operate with the battery charge stand.]
1. Connect external equipment to the OPTICAL/LINE IN
terminal on the battery charge stand.
2. Insert a recordable MiniDisc.
3. Place the main unit on the battery charge stand.
4. Press the REC button.
5. Select an appropriate recording mode (page 125).
6. Start playback on the external equipment and adjust
the recording level by pressing the
or
button.
Adjust it so the level meter fluctuates between – 4 dB
and 0 dB at the maximum level.
7. Set the external equipment to the pause mode. (Select
the track to be recorded.)
8. Press the
button.
9. Resume playback on the external equipment and start recording.
To interrupt recording:
Press the
button while recording.
The track number increases by one.
To resume recording, press the
button again.
To stop recording:
Press the
button while recording.
TOC information is recorded.
To turn off the power:
Press the
button while in the stop mode.
Synchronous recording
(pages 32 - 33)
1. Press the REC button.
2. Select an appropriate recording mode (page 125).
3. Adjust the recording level by pressing the
or
button.
4. Press the MENU button.
5. Select "SYNC REC" by pressing the
or
but-
ton, and then press the ENTER button.
6. Select "ON" by pressing the
or
button, and
then press the ENTER button.
7. Recording starts when the unit detects sounds from the
connected equipment.
Note:
If the silence lasts for 3 seconds or more, the unit enters
the recording pause mode.
When the unit detects sounds again, a new track number
will be created and recording will start.
To cancel synchronous recording:
Press the
button while recording.
To perform synchronous recording in the last setting:
Press the REC button to enter the recording pause
mode and then press it again for 2 seconds or more.