Kenwood DM-5090 Скачать руководство пользователя

Страница: 51 / 56

DM-5090 (En)

Action

Meaning

Displayed Message

NO DISC

001 UNLOCK

001 SCMS ON

001 NotAudio

DISC FULL

TITLE FULL

BLANK DISC

NO TRACKS

READING

WRITING

DISC ERROR

EDIT NOW!

CAN’T EDIT

ok? (blinking)

PROTECTED

PLAY ONLY

Displayed messages and actions to be taken against them

Load a disc.

The digital cord or optical fiber cable is not
locked in position or connected incompletely (or
not connected).

Use analog recording.

Use another recordable disc.

More than 255 tracks cannot be recorded per
disc.

Refer to

”Total number of title characters”

When playback is required, use a recorded disc.

The disc can be used for recording without any
problem.

This is a normal operation.

Erase all tracks by executing

”

ALL”

. If this is

not possible, use another Mini Disc.

This is a normal operation.

Perform editing following the restrictions.

Press the

ENTER

key to execute editing.

Release the

“WRITE PROTECT”

condition.

Load a recordable Mini Disc.

This unit is not loaded with disc.

The digital cord or optical fiber cable is not
locked in position or connected incompletely (or
not connected).

An attempt is made to record digital signal from
a source while its digital copy has been prohib-
ited by SCMS.

The digital signal being input is not an audio
signal.

There is no recordable area on the disc.

An attempt is made to record a 256th track.

An attempt is made to assign a title with more
characters than usable.

The disc does not contain any recordings.

The disc does not contain any tracks but has a
disc title.

The

TOC

data of the disc is being read.

The data related to editing or recording is being
written in the disc.

The contents of

UTOC

are abnormal.

The editing operation is in progress.

An attempt is made to perform editing beyond
the restrictions, for example to erase a track
which is too short.

This is a message for confirming if editing can
really be executed.

The Mini Disc is in the

“WRITE PROTECT”

condition.

A playback-only Mini Disc is loaded.

In case of difficulty

Содержание DM-5090

























































Результаты поиска

Содержание DM-5090

Отзывы:

Похожие инструкции для DM-5090

Бренды по названию

Популярные бренды

Kenwood DM-5090, Инструкция по эксплуатации

Результаты поиска

Содержание DM-5090

Отзывы:

Похожие инструкции для DM-5090

Бренды по названию

Популярные бренды