Kenwood DDX9018BTS, Инструкция по эксплуатации

Страница: 73 / 110

Setup
73
English
User Interface Setup
You can setup user interface parameters.
1
Press the
[
MENU
]
button.
h h Popup menu appears.
2
Touch
[
SETUP
]
.
h h SETUP screen appears.
3
Touch
[
User Interface
]
.
h h
User Interface screen appears.
4
Set each parameter as follows.
■ [
Steering Remote Controller
]
(DDX9018BTS)
Sets the desired function in the steering
remote controller. See
Learning function of
steering remote (P.73)
.
■ [
Beep
]
(DDX9705S/ DDX9018BTS/ DMX905S)
Turn the key touch tone on or off.
Default is “ON”.
■ [
Beep Volume
]
(DDX9905S)
Set the sound volume of the key touch tone.
"0" (Off ) – "3" (Default) – "5"
■ [
Widget SETUP
]
Set up the widget displayed on the Home
screen.
(P.16)
■ [
Parking Assist Display
]
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[
ON
] : Always displays information.
[
Dyn.
]
(Default): Displays information when
the sensor detects obstacles.
[
OFF
]
: Cancels this function.
This can be set when the iDataLink
(commercially available) is connected.
■
[
Parking Assist Position
]
Select where to display information about
obstacles on the screen (left or right).
“Left”/ “Right” (Default)
This can be set when the iDataLink
(commercially available) is connected.
■
[
Language Select
]
Select a language.
■ [
Time Format
]
Select the time display format.
"12-Hour" (Default)/ "24-Hour"
■
[
Clock
]
[
GPS-SYNC
]
(Default): Synchronizes the clock
time with the GPS.
[
Manual
]
: Set the clock manually.
■ [
Time Zone
]
Select the time zone.
■ [
Clock Adjust
]
If you select
[
Manual
]
for Clock, adjust the
date and time manually.
(P.73)
Ñ
Adjust the date and time
manually.
1
Touch
[
Clock
]
on the User Interface screen.
2
Select
[
Manual
]
.
3
Touch
[
Time Zone
]
on the User Interface
screen.
4
Select the time zone.
5
Touch
[
Clock Adjust
]
on the User Interface
screen.
6
Adjust the date, then adjust the time.
7
Touch
[
Set
]
.
Ñ
Learning function of steering
remote (DDX9018BTS)
This function is available only when your
vehicle is equipped with the electrical steering
remote controller.
If your steering remote controller is not
compliant, learning may not be completed
and error message may appear.
1
Touch
[
Steering Remote Controller
]
in
the User Interface screen.
h h Steering Remote Controller Setting
screen appears.
!B5A-2485-00_18DDX_K_En.indb 73 2018/02/20 18:24