Kenwood DDX8020S, Инструкция по эксплуатации

Страница: 73 / 116

Setup
73
English
5
Touch
[
Learning completed
]
.
NOTE
• When changing the function already learned,
press and hold the button you want to change
in step 2 and then touch to select the changed
function from the function list.
• Confirm the contents of the settable function on
the function list. You cannot edit the function list.
• To initialize the contents, touch
[
Learning
initialisation
]
of
[
Steering Remote
Controller
]
in User Interface screen. After you
touch [
Initialise
] , a confirmation message
appears. Follow the message and complete the
operation.
Ñ
Register operations by Gesture
Control (DDX920WDABS)
You can register operations that work by the
motion of your hand.
1
Touch
[
Gesture SETUP
]
on the User
Interface screen.
h h Gesture SETUP screen appears.
2
Touch a gesture mark you want to set.
■ [
Initialise
]
Return to the initial setting. The confirmation
message appears. Touch
[
Yes
]
.
3
Touch the function you want to set.
4
Repeat steps 2 and 3 as necessary.
5
Touch
[ ]
.
Special Setup
You can setup special parameters.
1
Press the
[
MENU
]
button.
h h Popup menu appears.
2
Touch
[
SETUP
]
.
h h SETUP screen appears.
3
Touch
[
Special
]
.
h h
Special screen appears.
4
Set each parameter as follows.
■ [
DEMO
]
Select the demonstration mode. Default is
“ON”.
■ [
Software Information
]
Confirm the software version of this unit.
(P.73)
■ [
Open Source Licenses
]
Display the open source licenses.
■ [
Initialise
]
Touch [
Initialise
] and then touch [
Yes
] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
Ñ
Software Information
You can confirm the software version of this
unit.
1
Touch
[
Software Information
]
in the
Special screen.
2
Confirm the software version.