ENGLISH
61
CONNECTION/INSTALLATION
R
Installation procedure
1
To prevent a short circuit, remove the key
from the ignition and disconnect the
·
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Connect the wiring harness wires in the
following order: ground, battery, ignition.
5
Connect the wiring harness connector to
the unit.
6
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (e.g., the sound may skip).
7
Reconnect
the
·
battery.
8
Press the reset button.
9
Configure
<Initial Setup>
. (page 4)
Installing the unit
R
Installing the unit
• Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
R
When installing the unit using the
mounting bracket removed from the
car
Car Bracket
5
or
6
5
or
6
• Select the appropriate type of screw for the
mounting bracket: flat head (
5
) or round head
(
6
).
R
Installing the trim plate
1
Attach the trim plate (
2
).
2
