Kenwood DDX3048, Руководство по установке

Страница: 4 / 20

4 DDX418/DDX4048BT/DDX318/DDX3048
Connecting Wires to Terminals
Connect to vehicle's reverse lamp
harness when using the optional rear
view camera.
(Parking sensor wire)
Connect to the vehicle's parking
brake detection switch harness.
For best safety, be sure to connect
the parking sensor.
⁄
Light Green
Extension cable (Accessory
2
)
Antenna Cord
FM/AM antenna input
Accessory
1
FUSE ( 10A )
(Steering remote control wire)
Light blue/Yellow
To use the steering wheel remote control feature, you need
to an exclusive remote adapter (not supplied) matches
your car is required.
If no connections are made, do not let the cable come out from the tab.
(Mute control wire)
Brown
To the terminal that is grounded when either the
telephone rings or during conversation. (To connect the
Kenwood navigation system, consult your navigation
manual.)
To car light control switch
(Dimmer control wire)
Orange/White
Depending on what antenna you are using, connect either
to the control terminal of the motor antenna, or to the
power terminal for the booster amplifier of the film-type
antenna.
(Antenna control wire)
Blue
When using the optional power amplifier, connect to its
power control terminal.
(Power control wire)
Blue/White
Yellow (Battery wire)
Black (Ground wire)
-
(To car chassis)
Red (Ignition wire)
Battery
White
+
/ White/black
-
: To front speaker (left)
Gray
+
/ Gray/black
-
: To front speaker (right)
Green
+
/ Green/black
-
: To rear speaker (left)
Purple
+
/ Purple/black
-
: To rear speaker (right)
(Reverse sensor wire)
Purple/White
Bluetooth Microphone (Accessory
7
)
DDX418/DDX4048BT only
Ignition key switch
ACC
Car fuse box
(Main fuse)
Car fuse box