14
DDX3028/3048/3058/318/4038/4038M
DDX4028BT/4038BT/4038BTM/4048BT/4058BT/418
Item
3rd line display *1
q
NORMAL PLAY
Yes
w
EF OUT-TRACKING OFF
No
e
EF IN-TRACKING OFF
No
r
CD-LASER ON
Yes
t
DVD-LASER ON
Yes
y
DVDx1 JITTER MODE
Yes
u
SEARCH & JITTER
Yes
i
MONITOR
Yes
o
DVDx1 PLAY
Yes
!0
STOP
No
!1
EJECT
No
!2
LOAD
No
!3
SLEEP
No
!4
EEPROM DATA OSD
No
*1: 3rd line display: Display Arg 2,3,4,5 (HEX) of the com-
mand received from the module, in the following format.
X X X X
X X X X
Arg 2 Arg 3
Arg 4 Arg 5
• Transmit “OSD display request command” (start EE-
PROM record data OSD display mode) to DISC module.
• If, while this item is selected, remote controller key
(CURSOR UP/ DOWN/ LEFT/ RIGHT) signal is received,
forward to the DISC module the same (CURSOR UP/
DOWN/ LEFT/ RIGHT).
• If this item is selected, only POWER OFF is valid. Selec-
tion of the items
q
~
!3
is invalid. (Due to DISC module
not guaranteeing regular operation after this mode)
4. RUNNING MODE display speci
fi
cations (Layer 2)
Directly touch the item to select the operation.
EXIT
BACK
RUNNING MODE
DVD MODE 5
COUNT
DVD ERROR
016458
010024
DVD MODE 1
DVD MODE 2
DVD MODE 3
DVD MODE 4
DVD MODE 5
DVD MODE 6
1st line: Title
2nd line: Item 3rd line: Counter
4th line: DVD error
∗
2nd to 4th lines are not displayed immediately after going
into RUNNING MODE. 2nd to 4th lines are displayed as
the items are selected.
∗
[BACK] and [EXIT] keys are valid until a RUNNING MODE
item is selected.
∗
After an item is selected, [BACK] and [EXIT] keys are in-
valid. This condition is cleared by turning the power OFF
(Clear by ACC OFF/ BATTERY OFF).
• DVD MODE 1~DVD MODE 6
Execute DVD running mode 1~6. (Refer to the following
DVD mechanism running mode list.)
2nd line display: DVD MODE 1~6
3rd line display: Display Arg 5,6,7 (BCD) of the Unit request
(running status) received from DISC module in 6 digits.
4th line display: Display Arg 2,3,4 (HEX) of the Unit request
(running status) received from DISC module in 6 digits.
• Running mode list
Mode
Operation in 1 cycle
Mech-
anism
error
Disc
error
Feed
error
EE-
PROM
error
1
Loading
→
Eject
→
Wait 5 seconds
Stop
-
-
2
Loading
→
Eject
→
Wait 5 seconds
Retry
-
-
3
Loading
→
Play back
→
Eject
→
Wait
5 seconds
Stop Stop Stop
-
4
Inner circumference
→
Outer circum-
ference
→
Inner circumference (seek-
ing)
Stop Stop Stop
-
5
Loading
→
EEPROM read
→
EEPROM
value check
→
Play back
→
Eject
→
EEPROM read
→
EEPROM write
→
Wait 5 seconds
Stop Stop Stop Stop
6
Loading
→
EEPROM read
→
EEPROM
value check
→
Play back
→
Eject
→
EEPROM read
→
EEPROM write
→
Wait 5 seconds
Stop Stop Stop Stop
• Running mode 1 and 2 tests only loading and ejecting of
disc.
• Running mode 4 does not include ejecting. 1 cycle con-
sists of accessing outer circumference
→
accessing in-
ner circumference.
• Running mode 3 tests disc loading, ejecting, and play
back.
• Running modes 5 and 6 tests and checks disc loading,
ejecting, play back, EEPROM operation.
• Mechanism error means an error at the time of loading
and/or ejecting.
• Disc error is an error at the time of disc play back.
• Feed error is an error at the time of feed operation.
• EEPROM error is an error at the time of EEPROM opera-
tion.
• Stop at the time of error is the mode where the operation
stops immediately after an occurrence of an error without
retrying.
• Retry at the time of error is the mode where normal op-
eration retry is executed after the initial error, and if the
error persists, the operation stops.
TEST MODE
