Kenwood CT Series, Инструкция по эксплуатации

Страница: 15 / 29

15
CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 (En/ M )
Convenient music search (DPSS)
Rew ind & Play operation
Dash & Play operation
Single-tune repeated playback operation
Direction of tape direction indicator: 3 .
Press simultaneously.
Press simultaneously.
The Dash & Play skips long non-recorded spaces automatically as the tape is played.
This operation cannot be performed w ith the remote control (of the separately sold amplifier).
÷
In case the REV.M ODE key is set to “
[
” and tapes are inserted in both
of the decks, w hen a deck finishes Dash & Play, the other deck starts
Dash & Play for 16 times, after w hich it stops.
Each press sw itches the indication.
1
“ [ ” : Tw o sides are played only once, after w hich playback
stops.
2
“
”
”: Tw o sides are repeated 8 times, after w hich playback
stops.
3
“
“
”: One side is repeated 8 times, after w hich playback
stops.
When direction of tape direction indica-
tor is
3
:
Press simultaneously.
÷
Press the stop (
7
) key to stop playback and cancel this operation.
÷
Normal playback resumes after repeating the same tune for 16 times.
÷
Press the stop (
7
) key to stop playback and cancel this operation.
¡ 1
2 3 7
¡ 1
2 3 7
Direction of tape direction indicator:
2
.
÷
Tape returns to the beginning of the tape side being played and
playback restarts from there.
÷
Press the stop (
7
) key to stop playback and cancel this operation.
2 3 7
1
Play the tune to be repeated.
2
Press the play key of the same direction
as the current tape transport direction.
REV.MODE
¡ 1
1
Determine the playback mode (conditions).
2
Press the
1
and
¡
keys simultaneously.
This operation cannot be performed w ith the remote control (of the separately sold amplifier).
Downloaded from: http://www.usersmanualguide.com/