40
CORE-A55/KAF-A55
Component connected to D.AUDIO connector
Symptom
Remedy
See page
Kenwood digital audio player cannot
be controlled from the main unit or
remote control unit.
Connect using the connection cable (separately available).
Check if a compatible model is connected.
●
●
10
36
PC block
Symptom
Remedy
See page
The PC does not recognize this
system.
Connect the PC and this system properly using a USB cable.
If a USB hub is used in the connection, check if the hub is
functioning properly. Alternatively, change the connected port.
●
●
11
No audio output or too low level.
Set the PC properly.
●
24
Audio is interrupted.
The audio may be interrupted if the PC is used for an operation
that imposes a burden on the CPU during the audio output.
Avoid executing operations that may impose a burden on the
CPU.
The audio may be interrupted if a USB cable is connected to
or disconnected from another USB connector of the PC. Do
not connect or disconnect the USB cables to other equipment
during audio playback.
●
●
—
Audio is noisy.
Noise may be noticeable if the system is installed near a source
of strong magnetic waves (TV, etc.). Install the system away
from a source of strong magnetic waves.
●
7
Remote control unit
Symptom
Remedy
See page
Remote control is unavailable.
Replace the batteries with new ones.
Use the remote control unit within the controllable distance.
●
●
15
Troubleshooting
B60-5784-00̲00̲English.indd 40
B60-5784-00̲00̲English.indd 40
08.9.16 11:39:27 AM
08.9.16 11:39:27 AM
