Kenwood CK 405, Инструкция по использованию - Рекомендации по установке

Страница: 27 / 48

27
This cooker has class “2/1” overheating protection so that it can be installed next
to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a
gap of at least 200 mm must be left between the side of the cooker and the furniture.
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered synthetic material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
Curtains must not be fitted immediately behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below.
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent
falling out.
The cooker must be installed by a suitable suitable qualified technician and in
compliance with local safety standards.
650 mm
500 mm
450 mm
200 mm
Fig. 9.1
9 - INSTALLATION