Kenwood CK 304 G, Инструкция по эксплуатации, Страница: 40 / 44

40
Fig. 10.2
D
B
PE
A
N
L
230 V
PE N L
1
(L
2
)
Fig. 10.3
Before effecting any intervention on
the electrical parts of the appliance,
the connection to the network must
be interrupted.
Earth cable must be 2 cm longer than
neutral and live cables.
FEEDER CABLE SECTION
type H05RR-F
230 V 3 x 0,75 mm
2
ELECTRICAL FEEDER CABLE CONNECTION
The operations must be executed by a qualified technician.
To connect the supply cable:
- Remove the screws securing the cover “ A ” on the rear of the cooker (fig. 10.2).
- Feed the supply cable through the cable clamp “ D ”. The supply cable must be of
a suitable size for the current requirements of the appliance; see the section “Feeder
cable section”.
- Connect the wires to the terminal block “ B ” as shown in the diagram in figure 10.3;
or connect the phase wires to the terminal block “ B ” and the earth wire to the
terminal PE as shown in figure 10.2.
- Take up any slack in the cable and secure with the cable clamp “ D ”.
- Replace the cover “ A ”.