Kenwood CK 300 FFD, Инструкция по эксплуатации

Страница: 23 / 48

23
Fig. 8.2
BURNERS
The burners can be removed and washed
with soapy water only.
They will remain perfect if always
cleaned with products used for silver-
ware.
After cleaning, check that the burner-
caps and burner-heads are dry before
placing them in the respective hous-
ings.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see fig.
8.1 - 8.2) - failure to do so can cause
serious problems.
Check that the electrode “S” (fig. 8.1) is
always clean to ensure trouble-free
sparking.
Check that the probe “T” (fig. 8.1) next
to each burner is always clean to ensure
correct operation of the safety valves.
Both the probe and ignition plug must be
very carefully cleaned.
Fig. 8.1
S
F
C
T