Kenwood CD Series Скачать руководство пользователя страница 9

Страница: 9 / 29

CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)

REM OTE CON TROL UN IT

RC-P0 6 0 1

R A

: CD

Preparing to Play Tracks

Load/unload a disc.

Close the tray.

ALL TEXT SEARCH (CD-206/DPF-R6010 only)

For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
This allow s text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster.

: Keys and controls used in the operations described on this page.

All DISC indicators "

" light regardless of how many discs are present.

Label side

Disc tray

Place/ remove a disc.

When loading or unloading other discs

Search in progress or reading information

Blinks.

When the disc is CD-TEXT

Repeat the above procedure so that the complete disc information is
read into the CD player.

In the case of a non-CD-TEXT disc, the

”D1 : NO CD TEXT“ display w ill

appear for approx. 3 seconds.

The information read into the CD player is cleared w hen
the tray is opened. Therefore, perform this operation
again if the tray w as opened.

After loading all the discs, operate in stop mode.

Preparation

• Turn the unit ON.

Remote control unit only

Do not touch the played side of disc.

Loading tw o discs together w ill cause malfunctioning.

Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction w ill result.)

A single CD (8 cm disc) can also be played.

Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used w ith this unit.

When loading/unloading a disc w hile the tray rotates, a malfunction
might occur. Load/unload the disc w hen the tray does not rotate.

–

STAN DBY

POW ER

Press the ON/ STANDBY (POWER /

)key.

DISC SKIP

CD-206/ DPF-R6010

DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

Open the tray.

CD-204/ 203/ DPF-R4010/ R3010

REM OTE CON TROL UN IT

RC-P0 6 0 1

ALL TEXT

SEARCH

Hereafter the illustration of the common parts
on the front panel is of CD-206/ DPF-R6010.

All DISC indicators "

" light regardless of how many discs are present.

1 0

TRACK N O.

0 1

0 0 0

SIN GLE
TOTAL

DISC
N O.

Loading/unloading discs

Downloaded from:

http://www.usersmanualguide.com/

Содержание CD Series






























Результаты поиска

Содержание CD Series

Отзывы:

Бренды по названию

Популярные бренды

Kenwood CD Series, Инструкция по эксплуатации

Результаты поиска

Содержание CD Series

Отзывы:

Бренды по названию

Популярные бренды