29
CD-2280M/DPF-J9010 (En)
Select “MUTE ON“.
2
MODE
∞
DISC SKIP
5
SET
E
S
E
L
T
C
D
T
S
I
S
C
T
E
M
Use the following procedure before playing the DTS disc.
1
Press the MODE key.
÷
When the
MODE
key is pressed during DTS ANALOG MUTE mode, the
DTS ANALOG MUTE mode is cancelled.
Preparation
÷
Load DTS discs into the carousel.
0
÷
Check that the Mechanism-A is in the normal
play TRACK mode.
#
1
Activate the DTS ANALOG MUTE mode.
2
Select “DTS ANALOG MUTE”.
Select the DTS disc.
3
Select the disc number.
Each press switches the modes as follows:
1
MUSIC TYPE
2
TITLE INPUT
3
ALL DATA READ
4
ALL INFORMATION
5
DTS ANALOG MUTE
÷
The disc number can be selected directly by using the numeric keys in
place of the
DISC SKIP
keys.
÷
To register another DTS disc, repeat the procedure from step
3
.
DISPLAY-A
∞
DISC SKIP
5
Previous disc
Next disc
\
To quit DTS ANALOG MUTE mode
Press the MODE key.
To delete the DTS registration
Use the following procedure before moving or changing a DTS disc, and register the disc again.
1
Perform steps
1
of “Registration of
DTS discs“.
2
Select “MUTE OFF“.
∞
DISC SKIP
5
SET
\
3
Select the DTS disc to be deleted.
SET
∞
DISC SKIP
5
Previous disc
Next disc
\
To quit DTS ANALOG MUTE mode
Press the MODE key.
SET
Registration of DTS discs
: Keys and controls used in the operations described on this page.
\
∞
DISC SKIP
5
SET
\
Each press switches the modes as follows:
1
MUTE ON
2
MUTE OFF
Each press switches the modes as follows:
1
MUTE ON
2
MUTE OFF
Note
Note
When a DTS disc is played, the audio signal is not output at the analog output jacks.
