English
5
6
Troubleshooting Guide
Problem
Solution
Appliance does
not operate.
• No power - check the unit is plugged in.
• Check the lever is fitted correctly.
• Check that the cutter blade has pierced the
can and that the lever is fully pushed down.
Unable to open
can.
• If there is a bump,dent, or thick seam in the
rim of the can then open from the other end
or reposition the blade.
Can does not
rotate.
• The unit is only suitable for round steel cans
with straight sides and rolled edges.
• If the lid of the can is recessed the drive
wheel cannot engage.
• Aluminium cans will not adhere to the
magnet.
The knife
sharpener does
not work.
• Serrated knives are not suitable.
• Knives without a serrated edge, preferably
carbon steel are most suitable for
sharpening.
• The sharpening action will need to be
repeated several times in order to sharpen
the knife sufficiently.
Bottle opener does
not work.
• Ensure the bottle is suitable.
• Only metal pop cap bottle are suitable for
the unit.
Service and
Customer Care
l
If you experience any
problems with the
operation of your appliance,
before requesting
assistance refer to the
’Troubleshooting Guide’
section in the manual or visit
www.kenwoodworld.com.
l
Please note that your
product is covered by a
warranty, which complies
with all legal provisions
concerning any existing
warranty and consumer
rights in the country where
the product was purchased.
l
If your Kenwood product
malfunctions or you find
any defects, please send it
or bring it to an authorised
KENWOOD Service Centre.
To find up to date details
of your nearest authorised
KENWOOD Service centre
visit www.kenwoodworld.
com or the website specific
to your Country.
l
Made in China.