11
C-V351/C-V301 (EN)
Setup of the Graphical Remote Control (GRC) unit (For C-V351)
Controls and indicators
(Optional with the C-V301)
Approximate operating range
Remote sensor
Infrared remote control
GRC or RC
Infrared ray system
1. The supplied batteries are intended for use in operation check.
Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than
before, replace all four batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-
frequency lighting fluorescent lamp enters the remote sen-
sor. In such a case, change the system installation position to
prevent the malfunction.
4. The GRC display may show erroneous information when the
GRC unit is operated from outside the specified range.
Notes
Notes
For C-V351
Note
Note
The Graphical Remote Control (GRC) unit provided with the AV CONTROL CENTER can also control KENWOOD cassette decks,
CD player, DVD player and LD player which are connected to it through system control cords. For details of the controllable
functions, refer to the instruction manuals of these components.
Model:GRC-151
Infrared system
Perform “Model Type Setup”
of the GRC before using it.
The following menu screen
appears immediately after
the batteries have been
loaded for the first time.
Segment screen
Menu screen
Operation keys
1
Segment screen
This area displays the fixed icons.
2
Return icon
Select to return to the previous
display.
3
Main Menu icon
Select to change the input source
or select Main Menu 2.
4
Confirm icon
Select to confirm a setting, etc.
5
Sound icon
Select to control the sound-related
functions.
6
DVD icon
Select to control the DVD player.
7
CD icon
Select to control the CD player.
8
MD icon
Select to control the MD recorder.
9
Tuner icon
Select to control the tuner.
0
LD icon
Select to control the LD player.
!
Tape A icon
Select to control cassette deck A.
@
Tape 1 icon
Select to control cassette deck 1.
#
Tape B icon
Select to control cassette deck B.
$
Cable TV icon
Select to control the cable TV.
%
TV icon
Select to control the TV.
^
VCR 1 icon
Select to control VCR 1.
&
Satellite Tuner icon
Select to control the satellite tuner.
*
VCR 2 icon
Select to control VCR 2.
(
Set Up icon
Select to make setup operations.
)
Menu screen
This area displays the
control key icons and
level information.
¡
Mode display
The above illustration
indicates the Setup
mode.
™
CD icon
Select to set up the
CD player.
£
Reset icon
Select to return to the
“Model Type Setup”
menu screen.
¢
Joystick key
For use in selecting icons.
The joystick moves in 8 direc-
tions.
∞
ENTER key
Press to enter a selection.
§
VOLUME (UP) control key
Press to increase the volume
level.
¶
VOLUME (DOWN) control
key
Press to decrease the volume
level.
•
MUTE key
Press to mute sound temporarily.
ª
(ON/STANDBY) key
Press to switch the AV CONTROL
CENTER and the components
connected to it through system
control cords between ON and
STANDBY.
÷
The input source can be selected
using icon
3
.
÷
Icons
6
to
*
are used to select the
component to be controlled.
The displayed icons are variable depending on the “Model
Type Setup” for matching the specifications with the AV
CONTROL CENTER which uses the GRC unit and “Setup” for
matching the specifications with connected source compo-
nent.
Model Type Setup
Model 6
Model 5
Model 4
Model 3
Model 2
Model 1
ON/STANDBY
MUTE
VOLUME
ENTER
Setup
DVD
Sound
C D
Sat.
Tape1
Cable
Reset
VCR1
VCR2
L D
M D
T V
Confirm
Set Up
Return
TapeA
TapeB
Tape1
LD
Tuner
CD
VCR2
VCR1
TV
Sat.
Cable
MD
Main
Menu
DVD
§
¶
•
£
ª
)
™
1
2
3
4 5 6 7 8 9 0 ! @ # $ % ^ & * (
¢
∞
¡
30
°
5m
30
°
