Kenwood AT320, Руководство пользователя

Страница: 5 / 40

Use the multi-mill to mill such things
as spices, herbs, nuts, baby food,
salad dressings, cooked fruit,
biscuits, bread and coffee beans.
before using your Kenwood
attachment
●
Read these instructions carefully and
retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Don’t touch the sharp blades. Keep
the blade unit away from children.
●
Only use the jar and the blade unit
with the base supplied.
●
Never blend hot liquids in the multi-
mill.
●
Never remove the multi-mill until the
blades have completely stopped.
●
Never attempt to fit the blade unit to
the machine without the jar fitted.
●
Switch off and unplug:
● ● before fitting or removing parts
● ●
after use
● ● before cleaning.
●
Never use a damaged machine. Get
it checked or repaired: see ‘service’.
●
Never leave the appliance
unattended when it is operating.
●
Never run the multi-mill for longer
than two minutes - it will overheat.
●
Switch off as soon as you have the
right consistency. Spices take less
than one minute.
●
Don’t mill turmeric - it’s too hard.
●
Break ginger up before milling.
●
Do not let infirm people use the
appliance without supervision.
●
Do not let children use or play with the
appliance/attachment.
●
Only use the appliance/attachment for
its intended domestic use. Kenwood
will not accept any liability if the
appliance/attachment is subject to
improper use, or failure to comply with
these instructions.
before use
Wash the parts: see ‘cleaning’
key
base
rubber seal
blade unit
milling jar
assembled multi-mill
storage jar and lid (4 supplied)
to use the multi-mill
1 Put your ingredients into the jar.
Don’t fill above the maximum level
indicated on the jar.
2 Ensure the rubber seal is snugly in
place on blade unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the base onto the jar until it’s
finger-tight.
5 Remove the high speed outlet
cover .
6 Place the multi-mill over the outlet,
turn clockwise and at the same time
push down until the attachment
engages
. Then turn further
clockwise until the unit locks into
position.
7 Switch on to maximum speed.
English
2