Kenwood 8015 Скачать руководство пользователя страница 44

Страница: 44 / 52

English

— 44 —

Removing the Unit

Removing the hard rubber frame

■

Insert the removal tool into the indentations in the hard rubber
frame, and pull it gently until the lock is released.

Accessory

Removal tool

Removing the Unit

■

Push upward the both
tools, as shown, and pull
the unit toward you until it
is halfway out. The unit
may drop if you pull it out
completely.

Pull the unit all the way out
with your hands, being
careful not to drop it.

Make the faceplate control panel appear.

Refer to the section “Removing the hard rubber frame” and
then remove the hard rubber frame.

Remove the hex head machine screw with washer (M4

8) on

the back panel.

Insert the removal tool deeply, as illustrated, with the L on the
left and the R on the right.

If the unit is removed while
the faceplate is closed, use
the removal tool with the left
and right reversed, as
illustrated.

NOTE

Accessory

Removal tool

KDC-X715_U.S_r9 00.12.26 3:48 PM Page 44

Содержание 8015





















































Результаты поиска

Содержание 8015

Отзывы:

Бренды по названию

Популярные бренды

Kenwood 8015, Инструкция по эксплуатации

Результаты поиска

Содержание 8015

Отзывы:

Бренды по названию

Популярные бренды