Kenwood 702IR - LZ - LCD Monitor, Инструкция по эксплуатации

Страница: 7 / 96

English
|
7
Initializing the User Settings
The setting value is set to the initial state of
factory.
1
Select the Memory clear mode
Press the [MENU] button.
Each time the button is pressed, the menu item
switches.
No Yes
Memory Clear
2
Set the Memory clear
Press the [
2
] button.
"System Settings were Initialized" is displayed.
• When you cancel this function, press the [
3
] button.
3
Exit Menu mode
Press the [MODE] button.
IR Headphones audio setting
You can select the IR Headphones audio you wish.
Display Setting
"Normal" Sound with monitor source.
"AV-IN1" Select the AV1 INPUT source.
"AV-IN2" Select the AV2 INPUT source.
"Off" No output to IR Headphones.
Setting the AV Output
Selects an AV source to be output at the "AV
OUTPUT" terminals.
Display Setting
"AV-IN1" Select the AV1 INPUT source.
"AV-IN2" Select the AV2 INPUT source.
"Off" No output to the AV OUTPUT terminals.
Surround Control
Turns the surround control function On or Off.
Display Setting
"On" The surround control function is On.
"Off" The surround control function is Off.
Frequency Setting
You can set to IR Headphones transmitter
frequency.
Display Setting
"2MHz" Set to 2MHz.
"3MHz" Set to 3MHz.
• Refer to the instruction manual of IR Headphones
(optional accessory), when setting for frequency.
B64-3413-00̲00̲01Eng.indd 7 B64-3413-00̲00̲01Eng.indd 7 06.1.20 2:14:53 PM 06.1.20 2:14:53 PM