background image

4

   

|

   

English

Safety precautions

Lens Fogging

When you turn on the car heater in cold weather, 
dew or condensation may form on the lens in the 
CD player of the unit. Called lens fogging,  this 
condesnation on the lens may not allow CDs to 
play. In such a situation, remove the disc and wait 
for the condensation to evaporate. If the unit still 
does not operate normally after a while, consult 
your Kenwood dealer.

2

WARNING

To prevent injury or fire, take the 
following precautions:

•  To prevent a short circuit, never put or leave any 

metallic objects (such as coins or metal tools) 
inside the unit.

2

CAUTION

To prevent damage to the machine, take 
the following precautions:

•  Make sure to ground the unit to a negative 12V 

DC power supply.

•  Do not install the unit in a spot exposed to direct 

sunlight or excessive heat or humidity. Also avoid 
places with too much dust or the possibility of 
water splashing.

•  Do not place the faceplate and the faceplate case 

in areas exposed to direct sunlight, excessive heat 
or humidity. Also avoid places with too much dust 
or the possibility of water splashing. 
(Faceplate case : KDC-1032/ 132CR only)

•  To prevent deterioration, do not touch the 

terminals of the unit or faceplate with your 
fingers.

•  Do not subject the faceplate to excessive shock, 

as it is a piece of precision equipment.

•  When replacing a fuse, only use a new fuse with 

the prescribed rating. Using a fuse with the wrong 
rating may cause your unit to malfunction.

•  Do not use your own screws. Use only the screws 

provided. If you use the wrong screws, you could 
damage the unit.

Do Not Load 3-in. CDs in the CD slot

If you try to load a 3 in. CD with its adapter into the 
unit, the adapter might separate from the CD and 
damage the unit.

NOTE

This Class B digital apparatus complies with 
Canadian ICES-003.

B64-3239-00̲K̲English.Indd   4

B64-3239-00̲K̲English.Indd   4

05.7.29   0:46:01 PM

05.7.29   0:46:01 PM

Содержание 1032 - KDC Radio / CD Player























Отзывы: