9 Product maintenance
The therapeutic equipment belongs to medical device, if the complete
machine is already aging and is not able to use, the process mode
according to the local legislation carry through scrap processing.
10 Product Scrap Processing
Main unit 1 pcs Charging Cable 1 pcs
Electrode pads 2 pcs Electrode wire 2 pcs
Manual 1 pcs
NOTE: There are 3 kinds of electrode pads in the below table. The electrode
pads here are for customers to choose.
11 Accessories and Parts
12 The Paraphrase of
Graphic Symbol
7)When the apparatus is moved, must be handled with care, avoiding the
shake.
8)The apparatus should be checked the batteries condition, to check
whether the output is good, if has abnormal conditions, you should pay
attention to it and service it in time.
9)The apparatus’ shell board should be pay attention to protection, avoiding
the abrasion.
10)The non-professional cannot disassemble the host to avoid getting an
electric shock or damaging the apparatus, an accident can happen because
of it, all at your peril.
10
11
⑹
Do not use the product in the place where is direct sunlight,
high heat, inflammable, electromagnetic radiation and humid.
⑺
Do not disassemble, repair and transform the therapeutic
apparatus, otherwise cause failure or get an electric shock
accident.
⑻
The therapeutic apparatus should be placed in the position
which is easy to move the plugs to use, it is easy to move the
plugs in emergency circumstances.
⑼
Check the equipment before each use to avoid the exposed
wires caused by accidental damages or other reasons.
⑽
Dust may affect the performance of the unit, please use a dry
soft cloth to clean the device as needed.
Please check whether the electrode is loose before each use,
otherwise it may have adverse effects on performance or cause
other problems.
1)Before turn on the main unit, please check whether the battery is charged;
2)If the apparatus runs normally, show key invalidly after press. To turn it off
after a few seconds and then opening, if still not normal, check whether it is
broken for the apparatus;
3)If all operation of the apparatus are normal but without output (the user
without feelings) after turn it on. Please check whether the electrode pads is
directly contacted with skin, the contacting parts whether has hair, clothes
and so on;
4)While cleaning, shutdown first, let the electrode wires stay away from the
electric supply socket. You can wipe by using soft cloth or towel with a little
water and after dry.
5)After each use, please clean electrode pads, you can wipe by using soft
cloth or towel with a little water and after dry, when conducting electrode
pads are particularly dirt, you can wipe by using soft cloth with a little
medicinal alcohol (alcohol concentration as 75%).
6)The apparatus should be placed in the place which is dry, ventilated and
good insulation use.
Model
EPAD
-D01
EPAD
-D02
EPAD
-D03
Drawing
Size
Effective area of
single piece (cm2)
Material
70×52mm
50×50mm
50×50mm
Hydrogel
Hydrogel
Hydrogel
33cm
2
25cm
2
25cm
2
