REV D: 05/16/20
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016
UNITED STATES OF AMERICA
TELEPHONE: (626) 359-8888 FAX: (626) 303-5151
12 OF 21
GEAR CASE AND AIRMOTOR DISASSEMBLY
1.
LOOSEN SET SCREW, ITEM 19 (FIGURE 7).
2.
USING WRENCH (OPTIONAL), ITEM KM# 4501300, REMOVE CASE, ITEM 13 (FIGURE 7).
3.
TO DISASSEMBLE GEAR CAGE ASSEMBLY:
•
REMOVE RETAINING RING, ITEM 2 (FIGURE 9).
•
PRESS OUT PINS (3) AND BEARINGS (3), ITEMS 4 AND 1 (FIGURE 9).
4.
SLIDE DEFLECTOR, ITEM 12 (FIGURE 7), OFF HOUSING, ITEM 4 (FIGURE 7).
5.
SLIDE AIR MOTOR OUT OF HOUSING, ITEM 4 (FIGURE 7).
6.
PULL GEAR, ITEM 14 (FIGURE 7), OUT OF AIR MOTOR.
7.
PULL PLATES, ITEMS 5 AND 11 (FIGURE 7), OFF CYLINDER, ITEM 7 (FIGURE 7).
GEAR CASE AND AIRMOTOR REASSEMBLY
1.
CLEAN AND LUBRICATE ALL PARTS PRIOR TO REASSEMBLY.
2.
REASSEMBLE ALL PARTS IN REVERSE ORDER.
3.
HAND TIGHTEN CASE, ITEM 13 (FIGURE 7), ONTO HOUSING, ITEM 4 (FIGURE 7).
4.
ATTACH AIR TO TOOL. WITH TOOL ACTIVATED, TIGHTEN WITH A WRENCH, CASE ONTO HOUSING. THIS
HELPS MAINTAIN THE ALIGNMENT OF AIRMOTOR TO GEAR CASE ASSEMBLY. DISCONNECT AIR SUPPLY.
