KENTMASTER 210-JB-A, Руководство оператора

Страница: 18 / 29

REV D: 02/02/08
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA
TELEPHONE: (626) 359-8888 FAX: (626) 303-5151
18 OF 28
1302530: SAW MANDREL NOSE ASSEMBLY,
STANDARD
ITEM PART # DESCRIPTION QTY
1 1001780 GASKET 1
2 1300190 SAW MANDREL 1
3 1300200 COVER 1
4 1301580 PLUG 1
5 1301590 LUBE PLUG 1
6 1301620 RING 1
7 1302370 BEVEL GEAR, STANDARD 1
8 1302390 NOSE - SAW MANDAREL 1
9 1302520 COLLAR BEARING 1
10 3124000 BEARING 1
11 3134060 BEARING 1
12 5100390 RETAINING RING 1
13 5100750 RETAINING RING 1
14 7000010 PLUG 1
15 7016100 LUBE FITTING 1
16 7681470 O-RING 1
17 7701250 O-RING 1
18 8209040 SCREW 6
19 8603050 SQUARE KEY 1
Figure 19 1302530: NOSE ASSEMBLY, STANDARD TORQUE
STANDARD TORQUE GEAR SET:
1302360 – BEVEL PINION GEAR (SEE 1302970)
1302370 – BEVEL GEAR (SEE NOSE 1302530)
BLADE: 1100 RPM
NOSE DISASSEMBLY:
1. Remove six screws (Item 18).
2. Using a 3/16” hex wrench, remove plug
(Item 14)
3. With a center punch inserted thru back of
nose (Item 8), press out mandrel (Item 2).
All internal parts should come out at this
time.
NOSE REASSEMBLY:
1. Reassemble all parts in reverse order.
2. Refer to Fig. 19 for proper assembly
orientation of ring and bearing (Items 6
and Item 11).