KENT KPE216-343, Инструкция пользователя

Страница: 3 / 8

3
ASSEMBLY INSTRUCTIONS
This heater is supplied with both wall mounting
brackets for fixed installation and wheels for
portability.
Portable Assembly
1. Position the heater carefully upside down
and slot the wheel assembly into the base
of the heater at each end.
Note: Each wheel assembly is marked with
‘L’ or ‘R’ to indicate its location.
2. Turn the heater the right way up.
3. Place the heater on a level surface in a
stable upright position.
The heater should only be operated at a
minimum distance of 1 metre from any wall
or other object. Position the heater in order
to optimise the air flow of the room.
Fig 1.
Fig 2.
Minimum Clearances & Positioning Guide Fixed Installation
Refer to the guide to correctly
locate the heater. Ensure
the wheel assemblies are
removed and stored safely, if
they are currently secured to
the heater.
Check the voltage on the
specification plate is the
same as in your home.
1. Drill three 6mm diameter
holes (A), (B), (C) in the
wall using Fig. 2 as a
guideline. To ensure the
most secure location,
affix to a stud.
200mm
200mm
300mm
300mm
FLOOR
Clear Space
1m
100mm
SOCKET
800mm
735mm
Recommended
Height
524mm
625mm
135mm
443.6mm
215mm
640mm
W
ALL
W
ALL
min
min
min
min
min
A
B
C