Your heater comes almost completely assembled. There is only a simple matter of placing the bricks and brick
retainer, positioning the baffle plate, and the heater is ready to be installed.
ASSEMBLING YOUR NEW HEATER
BRICK RETAINER
To hold the firebricks in place, you should now
position the brick retainer bracket over the
firebricks as shown below.
3
Evolution 4
Evolution 6
Evolution 8
BAFFLE PLATE
The baffle plate sits on two angle brackets towards
the top of the firebox. Ensure the tab faces
upwards, and runs from side to side.
You will need to slide the back edge of the baffle
plate onto the brackets and then slide the baffle
into position.
Ensure the baffle plate is pushed all the way to the
back of the heater.
C
C
C
C
C
C
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
C
B
B
B
B
B
B
B
B
B
B
C
C
A
A
A
A
FIREBRICK PLACEMENT
There are three sizes of firebox in the Kent range,
and each has its own arrangement of firebricks.
Refer to the diagrams below for your model of
heater. The bricks are placed with their longest
edge upright.
There will be gaps in between the firebricks. Allow
the ash to settle in between - there is no need to
remove the bricks when cleaning the firebox.
Brick Sizes
A - 173 x 74
B - 173 x 200
C - 119 x 200
