3
4
IMPORTANT SAFETY INSTRUCTIONS
• If the supply cord is damaged, it must be replaced by the original part in order to
avoid hazard
• Children should be supervised to ensure that they do not play with the appliance
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety
Product :
KENT AUTO SANITISER-6
Product Code
: 12012
Product Generic Name
: Hand Sanitser
Product Colour
: White
Mounting
: Wall-mounting
Electrical Input
: 230 V AC
Capacity of Sanitizer
: 6 L
Dispensing Qty.
: Adjustable amount (1-1.5 ml)
Working Voltage
: 24V DC
Auto Sensing Distance (range required)
: 200mm to 250 mm
Sensing Time
: 200mS Typical
Between sensing 3 seconds gap is required
Sensor Type
: Infrared Sensor
Hands to be used (Single or multi)
: Will work with both options
Net Weight
: 5.50 kg
Product Dimensions (mm)
: 390 (L) X 285 (W) X 440 (H)
Total Power Consumption
: 40W
TECHNICAL SPECIFICATIONS
Switch off the
power supply.
Open the
upper cover.
Remove the tank.
Place the tank back.
Refill sanitiser
in tank
CLEANING & MAINTENANCE
• Removable tank for refilling and cleaning
• Sanitiser Refill- open the cover to take the tank out. Fill the sanitiser and put the
tank back
Note:
Incase spray nozzle that blocked. Please contact your nearest KENT dealer or
branch, Mishandling of the same may lead to discontinue warranty.
Now place hand in front
of centre till proper
spray starts to come. At
this point all the air from
the system has been
removed.
Machine is now
ready for use.
Now block the suction
pipe with thumb so that
the sanitiser inside
does not fall and put it
in the tank.
Note:
Above shown images are for reference only.
