manualshive.com logo in svg
background image

Instructions For Use - Charger:

The LED Light on the Charger

Power On (Green light flashes slowly)

Battery Low (Red light stays illuminated)

Battery Charged 80% (Green light flashes rapidly)   

Battery Charged 100% (Green light stays illuminated)

Battery Pack temperature is too hot or too cold (Red light flashes slowly)

Battery Pack malfunction (Red and Green lights stay illuminated)

WARNING

1. Charger is plugged into a 100 – 240 V a.c outlet only.

2. If the battery pack is too hot or too cold, the charger will not fast charge the battery pack and 
the red indicator light is “blinking”. When the battery pack temperature returns to between 0° C 
(32° F) and 50° C (122° F), the charger will automatically begin charging.

3. If both red and green indicator lights are “ON” the battery pack either does not comply or is 
defective. Please contact your local KENT office.

4. Do  not  charge  the  battery  pack  in  the  rain,  snow  or  high  temperature environment.

5. Do not charge battery pack when environment temperature is below 0° C (32° F) or above 
40° C (104° F).

6. While charge the cool battery pack (below 0° C) in the warm indoor, keep the battery pack in 
the room for one hour to warm up before starting the battery pack. A cool battery may charge 
unsaturated.

7. Remove the plug after finishing the charge.

8. Do not use generator for charging the battery pack.

Содержание 86350






Отзывы:

Похожие инструкции для 86350