![background image](http://html1.mh-extra.com/html/kensington/rh-d11/rh-d11_instruction-manual_664246003.webp)
3
0800 422 274
NZ
Important Safety Instructions
Read this manual thoroughly before first use
, even if you are familiar with this type
of product. The safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to. Make sure you understand all instructions and
warnings.
Keep the manual in a safe place for future reference
, along with any
warranty information, your purchase receipt and the original carton. If you sell or transfer
ownership of this product, pass on these instructions to the new owner.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
Electrical safety and cord handling
•
Voltage: Before plugging in the heater, make sure your outlet voltage and frequency
correspond to the voltage stated on the appliance rating label.
•
Electrical circuit: To prevent overloading a circuit, do not plug the heater into a
circuit that already has other appliances working.
•
No adaptor, no extension cord: Do not use the heater with a power board or double
adaptor as this may overheat and create a fire risk. Do not use it with an extension
cord because the cord may overheat and cause a risk of fire.
•
WARNING: To reduce the risk of fire, electric shock or injury:
• Never touch the heater with wet or damp hands or feet.
• Protect the heater from moisture.
• Never spill liquid into the heater. Do not expose it to spray, dripping water and/or
water spillages, or use it where it could fall into water. Do not use the heater if any
part of it has become wet or it has fallen into water. Do not reach for an appliance
that has fallen into water. Switch off at the supply and unplug immediately. Call a
qualified service technician to inspect it and replace any part of the system that
has been wet.
•
Damage: Do not operate the heater with a damaged cord or plug, or after the heater
malfunctions or has been dropped or damaged. If the supply cord is damaged, it
must be replaced by the manufacturer or an authorised service agent in order to
avoid a hazard. Contact our after sales support line.
•
Plug: It is normal for the plug to feel warm to the touch; however, a loose fit between
the AC outlet and plug may cause overheating and distortion of the plug. Contact a
qualified electrician to replace a loose or worn outlet.
•
Protect the power cord:
• Do not twist or kink the cord or let it touch heated surfaces. Do not wrap the cord
around the appliance.
• Do not put any stress on the cord where it connects to the product.
• Arrange the cord away from where it could be accidentally pulled or tripped over.
Do not run the cord under carpeting, throw rugs or runners.
• Only operate the heater with the power cord fully unwound.
Содержание RH-D11
Страница 1: ...MODEL NUMBER RH D11 N13275...