Operating Instructions (Cont.)
6.
Timer settings
Kensington.
1
0
AFTER.SALES SUPPORT
S'
<rg)
0800 422 274
No timing is activated on the initial switch on. Press this button to switch on
timer and then use the " +" or "-" buttons to select desired timer on period
from 0.5 hr to 24 hr.
Auto Power On:
Note:This function should only be set if you require the heater to be
automatically turned on after a certain period of time . Activate under Stand-
by mode.
1. Press the on/off power switch to turn the appliance on. The stand-by
button and Timer button
s
w
ill
illuminate
. The appliance will be in Stand-by
mode.
2. Press the Timer button
and the start hour digit (0.0) will blink.
3. Use the “+” and “-” buttons to set the heater operation time between 1
and 24 hours. 0.0-5.0 hours increase by 0.5 hour, 5.0-24 hours increase by
1 hour. This function will activate once the hour digit stops blinking. The
count down digits will show on the display and the timer symbol will keep
blinking
un
til
set
time
is reached.
4. The heater will automatically turn on when the time runs out.
Remark: After the timer power on setting,
you
can make the power mode
and temperature setting
s s
o that the heater will turn on at the desired
temperature and power mode
.
5.
T
hermostat setting.
Press the thermostat button once, the display with blink.
The thermostat
temperature can be set by using the "+" and "-" buttons to select a setting
between 10
℃
and 30
℃.
An option for anti-frost at 5
℃
is also available. When
the desired setting is selected and no buttons are pressed for 3 seconds, the
display with stop blinking and the selection will be saved. During operation, the
heater will maintain the set ambient temperature switching on and off
automatically to regulate.
Содержание CL-H001E
Страница 5: ......