4
3, RS232 and R port
4,DVI signal input port
Figure 4.2.4 CAT-DVI-70CR-P Receiver Front and Rear Panels
1, Power interface
2,RJ45 port (network signal output)
1
、
RS232 and IR signal output
2
、
DVI signal output
4.3 Indicator light description
POWER: power indicator light, turn on the power after the light
MODE: device operating status indicator, blinking indicates that the device is operating normally
LINK: HDbaseT signal connection indicator, the device with a cable connected to a constant light
HDCP:HDCP: signal output indicator, blinking signal output is normal
5 Troubleshooting
Frequent Asked Questions
a. Network port indicator does not light up
Solution:
