ASSEMBLY OF CABINET AND LEG TO WORK SURFACE
CABINET ASSEMBLY SUPPLY LIST
QTY
PART DESCRIPTION
(4)
Hex Head Wood Screws
(4)
Washers
LEG ASSEMBLY SUPPLY LIST
QTY
PART DESCRIPTION
(6)
Hex Lag Screws
(6)
Washers
ASSEMBLY:
NOTE: Remove drawers from cabinet before assembly. Follow listed assembly procedures for
combination of two cabinets, two legs or cabinet and leg.
1.
Place a piece of cardboard on the floor and lay the bench top on it with finished surface
face down.
2.
Place cabinet housing upside down on the bench top. Position cabinet housing to allow
desired overhang from front to back and sides. Recommend enough overhang at front to
allow key in unlocked position to be in alignment with front edge of the top.
3. Mark mounting hole pattern to the top. Pre-drill 3/16" x 3/4" starter hole for lag screws.
LEG ASSEMBLY:
5. Locate work bench leg approximately 2" in from end of bench top. Mark mounting hole
pattern to the top. Pre-drill 3/16" x 3/4" starter hole for lag screws. Align bench leg and
attach using (6) washers and (6) lag screws.
FOOT REST ASSEMBLY SUPPLY LIST
QTY
PART DESCRIPTION
(4)
1/4-20 Screws
(4)
Washers
(4)
Nuts
���������
ASSEMBLY:
NOTE: Assembly of (2) cabinets, (2) legs or combination of cabinet and leg, must be completed
before foot rest assembly.
1.
Using 24" combination square measure distance from top to piercing location in leg cross
support, for foot rest attachment to cabinet side.
2.
Attach foot rest to leg cross support using (2) 1/4-20 screws, washers and nuts.
3. Extend and align unattached end of foot rest to cabinet side, using 24" combination square,
place blade against cabinet side with bead on foot rest. Check for horizontal and vertical
levelness, mark mounting hole pattern to cabinet side.
Drill (2) 5/16" diameter holes. Extend foot rest to cabinet wall and align to holes. Attach
using (2) 1/4-20 screws, washers and nuts.
Note: Attaching foot rest between two legs, follow step #2.
Attaching foot rest between two cabinets, measure to desired height and complete assembly required
in step #3.
FOOT REST ASSEMBLY
