2.
Fit shelf unit in position using two bolt and nut combinations per corner.
Do not attempt this operation single handedly.
3.
Slide the drawers into the drawer housings beneath the work top.
If it is necessary to remove the drawer at any time, locate the drawer retaining mechanism
under the bench top and push it upwards, while gently sliding the drawer forward.
Take care
not to trap your fingers when sliding the drawer forward.
ASSEMBLY INSTRUCTIONS
Tools required:
Two combination spanners, sizes 13mm and 14mm.
1.
Position the work bench top face down on a solid surface, allowing yourself plenty of room to
assemble the bench. Attach the bench legs using four bolt and nut combinations per leg (see Fig 1).
BOX CONTENTS
SAFETY GUIDELINES
Bench top (1)
Bench Legs (4)
Shelf (1)
Drawers (2)
M8 Nuts (24)
M8x55 Bolts (24)
Figure 1
Figure 2
Figure 3
Due to the weight of this piece of equipment, it is necessary to
employ two people in building and manoeuvring the work bench.
