Part No. 527138, Rev. 7/03
page 1 of 2
Thank you for purchasing this product. We produce quality built products
for value conscious users.
We welcome any comments or suggestions you may have, just call or
write the address below.
We hope you will continue to find us the most complete source for your
tool storage needs.
®
TOOL BOXES
CHESTS/CABINETS
WORK STATIONS
MODULAR CABINETS
Assembly Instructions
Style No. 50230 & 50260
Before Assembly of Your Wall Mounted Cabinet
Check carefully to insure that all parts listed on next page are included. If any are missing,
please call 800-413-8665. Do not discard packing material until assembly is complete.
Tools Required
Tape measure and level
Flat tip screwdriver
Drill and drill bit-pilot hole
as required for type of fastener
Model 50230
comes without
swing-out inner panels, and includes
30-piece tool holder set 99852.
Model 50260
comes with
(2) swing-out inner panels,
and includes 60-piece tool
holder set 99853.
Kennedy Manufacturing Company • 520 E. Sycamore St. • Van Wert, Ohio 45891
Phone: 800-413-8665 • Fax: 419/238-5644 • www.kennedymfg.com
