Kenmore W10110903, Инструкция по использованию и уходу

Страница: 2 / 12

2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Required
Location Requirements
The work surface can be installed on top of a front-loading
washer and dryer pair situated next to each other. The washer
and dryer must be level side to side and front to back and at the
same height. Proper installation is your responsibility.
Installation Spacing
■
The work surface will fit on top of a washer and dryer that are
each 27" (68.6 cm) wide and have a spacing of approximately
1" (2.5 cm) between them for the alignment pads.
Work Surface Dimensions
NOTE: The work surface will add 3" (7.6 cm) to the overall height
of your washer and dryer.
■
Measuring tape
■
Level
1"
(2.5 cm)
Top view
Bottom view
A. Alignment pads
B. Side pads
56
½
"
(143.5 cm)
25"
(63.5 cm)
3"
(7.6 cm)
27
³⁄₈
"
(69.5 cm)
27
³⁄₈
"
(69.5 cm)
1"
(2.5 cm)
1"
(2.5 cm)
B
A
Front edge
Back edge