Kenmore KM1000, Инструкция по использованию и уходу

Страница: 15 / 28

Using Your Water Optimizer 11
Using Your Water Optimizer
that can be toggled by pressing the
B
Dispenser Light Button . By default, it is set to
illuminate only when dispensing .
1. To toggle to
always illuminate
, press
B
Dispenser Light Button
once. Button will
remain illuminated.
2. To toggle to never illuminate , press
B
Dispenser Light Button again. Button light
will turn off.
3. To toggle back to illuminate only when dispensing , press
B
Dispenser Light Button
one last time. Button will re-illuminate.
Using ECO Mode
Your Water Optimizer is equipped with an environmentally aware energy saving feature
called
ECO Mode . This feature will power down the heating and cooling systems when
it senses the room’s ambient light has been significantly reduced. It will power back up the
heating and cooling system once it senses the ambient light levels have returned to their
normal level.
By default, this feature is enabled , which is indicated by the
C
ECO Mode/Filter Rest Button being illuminated white.
When
ECO Mode
is active, the
C
ECO Mode/Filter Rest Button
will illuminate green.
1. To disable ECO Mode , simply press and release the
C
ECO Mode/Filter Rest Button once. The light will turn off.
2. To re-enable
ECO Mode
, simply press and release the
C
ECO Mode/Filter Rest Button again. The light will turn back on to white.
Please Note:
Should you experience any issues with ECO Mode engaging at unwanted times, it may be
due to an insufficient ambient light levels (when the lights are turned on). To resolve, either
try relocating the appliance to an area that will expose the appliance to higher levels
of ambient light (when the lights are turned on), or disable ECO Mode by pressing
C
ECO Mode/Filter Rest Button
.