6
7
OPERATING YOUR COFFEEMAKER
OPERATING THE CONTROL PANEL
6. Turn on the coffeemaker by pushing in the START /STOP button. The START /STOP indicator will
illuminate to show that the coffeemaker is brewing. After a few seconds, hot water flows into the
filter to brew coffee. When the water stops flowing, brewing is complete, and the coffeemaker
automatically switches to the warming mode. For delayed brewing, see SETTING THE CLOCK,
TIMER AND AUTO-BREWING.
7. When you have poured out all the coffee in the carafe, press the START /STOP button to tum off
the appliance, and remove the carafe from the warming plate. NOTE: If the coffeemaker is not
turned off, it will automatically shut itself off after two hours.
PAUSE AND POUR FEATURE
The pause and pour feature enables you to remove the carafe from the Coffeemaker and pour a
cup of coffee before brewing is finished. When the carafe is removed, a special valve stops the
flow of coffee from the brew basket to the carafe. Brewing does not stop. IMPORTANT: If the carafe
is not replaced under the brew basket after 20 seconds, water and coffee will overflow from the
brew basket.
SETTING THE CLOCK, TIMER AND AUTO-BREWING
Use the Hour and Min Buttons to Set the Clock:
1. When the coffeemaker is first plugged in, the clock will flash the default time of 12:00 AM.
2. Press the Hour button to change the setting to any hour number between 12:00 am to 11:00
pm.
3. Press the Min button to change the setting to any minute number between 1 and 59
4. You can make the hours and minutes move more quickly in the clock display by holding the
buttons down.
5. The clock will begin keeping time at the moment the Hour and Min buttons are released.
Use the Prog, Hour and Min Buttons to Program an Automatic Brew Time:
1. First set the clock. See directions above.
2. Press the Prog button; the indicator will illuminate.
3. Set the time you wish the coffeemaker to begin brewing by pressing the "Hour'' and "Min"
buttons. Be sure to set the correct designation of AM or PM.
4. Once you have set the correct time to begin the automatic brewing and the clock has returned
to the time of day, press the Auto On button.
5. The Auto Brew can be cancelled at any time by pressing the Auto On button a second time. The
Auto On light goes out. To check what time the Auto Brew is set for, push in the Set Auto button
and the time will be displayed.
2. Use the carafe to fill the water tank of the
coffeemaker to the desired level with cold water.
There is a gauge marked from 4 to 12 cups
(600ml to 1800ml) on both the coffeemaker's
water tank and on the sides of carafe (see Fig. 4).
These marks the show the amount of cold water
needed for each cup of coffee.The amount
brewed coffee will differ slightly of due to the
coffee grinds absorbing
some water.
3. Place either the permanent gold-tone filter or
a size #4 cone paper filter into the brew basket
(see Fig. 5).
4. Add ground coffee. The amount coffee you use
is a matter of personalof taste (we recommend
one heaping tablespoon for every two cups).
Experiment with different amounts of ground
coffee per cup until you brew your perfect cup of
coffee. You can also try using a paper filter along
with the gold-tone filter.
5. Close the cover. Place carafe on the warming
plate and plug in appliance. The display
windowthe illuminates green and the coffee-
maker beeps for about 1 second if the clock is not
set. The clock does not have to be set to brew
coffee. To set the clock time, see SETTING THE
CLOCK, TIMER AND AUTO-BREWING.
1-4 CUP BUTTON
This special cycle optimizes the flavor when brewing l to 4 cups of coffee, but it can also be used
to increase the brew strength of any number of cups you are brewing. Push the START /STOP
button to start the appliance, and then push the 1-4 CUP button once and both the START/STOP
and 1-4 CUP indicators will illuminate, showing that the strong brewing option is activated.
NOTE: The 1-4 Cup button must be pushed after the START /STOP button is pressed. If not, the
function of the 1-4 Cup will not be activated. The coffeemaker will shut itself off after 2 hours and
signal shutoff with 5 long beeps.
Fig. 6
