Kenmore Elite Series, Инструкция по использованию и уходу, Страница: 4 / 5

6 7
OPERATING YOUR BLENDER OPERATING YOUR BLENDER
ICE CRUSH
Press the On/Off and then the Ice Crush button. the Blender will spin for one second
and rest for two seconds. This will repeat 5 times. The blender will then run
continuously for 45 seconds and then turn off. See CRUSHING ICE in BLENDER TIPS
AND TECHNIQUES section for further ice crushing details.
PULSE MODE
The blender has a Pulse function that is controlled by pressing one of the other
function buttons after the Pulse button has been pressed. To run the blender
intermittently (pulse mode) rather than continuously, first press the PULSE button.
The PULSE button words will illuminate. P will flash in the display window. Press one
of the six function buttons in the row above the display window. When you release
the button the blender will stop and turn off. Press the Pulse button again if you want
to leave Pulse operation.
MEASURING CUP LID HOLE
To add food or pour liquid into the jar
while blender is in operation, remove the
measuring cup in the middle of the lid.
Add the ingredients through the hole in
the middle of the lid, and then replace
the measuring cup
After adding ingredients, DO NOT allow the
blender to run without the lid and measuring
cup securely in place. The speed of the blades
will throw contents high up in the jar, and
without the lid could spill out.
WARNING:
Do not touch blades.
Always turn blender off and wait until
blades have stopped rotating before
removing jar or lid.
CAUTION:
When removing jar from motor base after recent blender
operation, avoid contact with the metal gear on the underside of the blade
assembly. The gear will be hot from use.
Single
Serve
Stir
On/Off
Chop
Mix
Liquefy
Pulse
Ice
Crush
USING THE SINGLE SERVE CUP
1. Insert the appliance plug into an appropriate
wall socket.
2. Fill the single serve cup with desired food and
secure the blade assembly lid onto the cup
as shown.
3. Turn the single serve cup upside down and
place it onto the motor base, aligning the
tabs on the cup with the motor base. Press
the On/Off button. The Single Serve button
words will flash 3 times and then go out. The
On/Off button words and the timer in the
window display will begin flashing.
4. Press the Single Serve button to
start blending. The timer in the window display
will count the number of seconds each time
the Single Serve button is pressed. Operate
blender with Single Serve button until
ingredients are satisfactorily blended. Press
On/Off button to leave Single Serve function.
5. Rotate the single serve cup counterclockwise
and take it out from the motor base (Fig. 7).
Turn the single serve cup over and rest it on a
flat surface. Replace the blade assembly with
the drinking lid (Fig. 8). Raise the cap on the
drinking lid to drink the blended contents
directly out of the cup.
Fig. 5
Fig. 6
Fig. 8
Single
Serve
Stir
On/Off
Chop
Mix
Liquefy
Pulse
Ice
Crush
Fig. 7