Kenmore Elite 795.71082.01 series, Руководство по обслуживанию

Страница: 21 / 56

- 21 -
6. TROUBLESHOOTING
6-1 COMPRESSOR AND ELECTRIC COMPONENTS
!
"
#
#
#
!
# " !
Power Source.
(Rated Voltage
±10%)?
OLP disconnected? Replace OLP.
Reconnect.
Check connection
condition.
YES
YES
Open or short
The range of resistance is between 1~50 (ok)
NO
Remove PTC-Starter
from Compressor and
measure voltage
between Terminal C of
Compressor and
Terminal 5 or 6 of PTC.
No Voltage.
Applied voltage isn't in
acceptable range.
(115V ±10%)
Check
resistance of
Motor
Compressor. Check resistance
between M-C, S-C and
M-S in Motor
Compressor.
Replace
Compressor.
Check
resistance of
PTC-Starter.
Check resistance of two
terminals in PTC-Starter.
Reference Page12.
Check OLP.
Check resistance of two
terminals in OLP.
Reference Page12.
Check starting
state.
Check the power supply
under load.
(Compressor attempting
to re-start after being off
for 5 minutes).
Supply
voltage rating
with ±10%. Did
compressor
start? Compressor
is OK
Replace the
compressor
Advise customer that
power supply needs to be
checked by an electrician.
YES YES
NO
NO