11
Operating the Triple Surface Element
The cooktop is equipped with a Triple radiant surface element
located at the right front cooktop position (Figure 1). Indicator
lights on the control panel at that position are used to indicate
what portions of the Triple radiant element will heat. The
light indicates that only the inner element will heat. The
light indicates that both inner and middle elements will heat
together. The
light indicates that all 3 portions of the
element will heat. You may switch between all of these different
settings at any time during cooking.
To Operate the Triple Surface Element:
1. Place correctly sized cookware on the radiant surface
element.
2. Touch and hold the
pad for the Triple element position
until a beep is heard. The display will show
“ - - ”
.
Note:
If no further pads are touched within 10 seconds the
request to power the element ON will clear.
Radiant surface elements may appear to have cooled after they have been turned off.
The glass surface may
still be hot
and burns may occur if the glass surface is touched before it has cooled sufficiently.
Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon holders or plastic wrappings
on top of the range when it is in use.
These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if
placed too close to the surface elements.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
3. Select the
(See Figure 2),
(See Figure 3) or
elements (See Figure
4) to heat by pressing the
pad once, twice or three times (Figures 4
show indicator lights with
ALL
3 elements selected).
4. Touch
Hi
pad once to turn ON the power level to HI (See Figure 5). Touch
Lo
pad once for Lo.
5. Each touch of the
Hi
or
Lo
pad will decrease or increase the power level
from
9.0
through
3.0
by .5 increments. Simmer power levels between
3.0
and
1.2
will decrease or increase by .2 increments.
Lo
is the lowest power level
available.
Note:
The power level may be adjusted at any time while the element is ON.
Each surface element provides a constant amount of heat at each setting.
Irregular glowing effect is depending of the element design and doesn’t
affect performance of the element. A glowing red surface heating area
extending beyond the bottom edge of the cookware indicates the cookware
is
too small
for the surface heating area.
6. When cooking has been completed touch the
pad once to turn the
element OFF.
Note:
If no element size is chosen when the Triple element is turned ON, the
control will default to the inner coil only. See recommended surface cooking
settings.
Note:
The
Hot Surface
message will be displayed on the control panel as soon as
the element is hot and will remain ON until the heating surface area has cooled
sufficiently.
Setting Surface Controls
(cont’d)
Содержание Elite 790.9751 Series
Страница 42: ...42 Notes ...