Kenmore ELITE 790.4399 Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 16

Kenmore ELITE 790.4399 Series Скачать руководство пользователя страница 10

10

front element and “

0

” will appear in the display. Touch

pad (See Figure 1, on

page 9) to connect bridge element and then touch

or

pads to set the

temperature desired. You may disconnect the bridge element at any time during

cooking by touching

pad. To instantly reset temperature to “

0

” touch

and

simultaneously. A beep will be heard each time the pads are touched.

3.

Start most cooking operations on a higher setting and then decrease to a lower
setting to finish cooking. Each surface element provides a constant amount of heat at
each setting. A glowing red surface heating area extending beyond the bottom edge
of the cookware indicates the cookware is

too small

. Please note that not all

cookware will fit the Bridge element correctly.

4.

When cooking has finished on any of the surface elements, touch

pad to turn

OFF that element. The indicator(s) will flash "

H

" when the cooktop is ON but the

element is turned OFF indicating that the surface may be hot to the touch. The
flashing "

H

" indicator will turn OFF after 30 minutes or less.

To switch the entire cooktop OFF touch and hold the

pad for 2 seconds (a beep

will sound) and release. When the cooktop is powered OFF the "

H

" will glow steadily

indicating the cooktop may be hot to the touch. The "

H

" indicator will turn OFF after

30 minutes or less.

Note: The entire cooktop will automatically power OFF 10 seconds after all surface
elements have been turned OFF.

Note: See Recommended Surface Element Settings Table on page 9.

Surface Controls Lock Feature

It is possible to lock the surface element controls by touching and holding down on

pad for 2 seconds. One beep will sound and the Lock Indicator light will glow when
properly activated.

To unlock the surface elements touch and hold down

pad for 2 seconds. One beep

will sound and the Lock Indicator light will turn off.

Radiant

surface elements may
appear to have cooled
after they have been
turned off. “

H

” will appear

in the display and will
continue to glow for 30
minutes or less.

The

glass surface may still
be hot

and burns may

occur.

«
...
8
9
10
11
12
...
»

Содержание ELITE 790.4399 Series

















Отзывы:

Нет отзывов